ISP Bindery Stitchers for Heavy-Duty Work

Model S3A 7/8"
The two (2) sheet to 7/8" capacity stitcher

With three sets of formers and drivers, the ISP S3A 7/8" performs like three stitchers in one.

  • A set for #25 round wire (2 sheets to 1/4")
  • A set for #20 x #25 flat wire (1/4" to 1/2")
    (Shipped with these parts installed)
  • A set for 19 x 21 1/2 flat wire (1/2" to 7/8")

The most particular customer will be pleased with perfect stitching on any job from two sheets to 7/8". The unit comes with saddle, flat table and gauges for flat and saddle stitching.

Model S3A 1 1/8"
For consistently thick flat work ranging from 1/8" to 1 1/8".

Features improved cut-off mechanism with carbide tip for #18 x 20# (type 230) high carbon book-binders wire.

Comes with table and gauges for flat stitching. Saddle is optional. (for use in the 1/8" to 1/4" work range only).

Specifications Model
S3A 7/8		 Model
S3A 1 1/8
Throat Depth Flat work 12" Saddle 15" Flat work 12" Saddle 15"
Capacity
(Dependent upon type, hardness and finish of paper stock or other materia) used.)		 2 sheets up to 7/8" 1/8" TO 1 1/8"
Standard width of stitch 7/16" 9/16"
Stitches per minutes 191 191
Stitcher clearance from top of compressed work to bottom of head 1 7/16" 1 7/16"
Stitch height from floor 33" 33"
Size of Wire 19 x 21 1/2
20 x 25 Flat
25 to 30 Round 		#18 x #20
Flat High Carbon
#20 x #25 Flat
Coil holders and wire supplied 1 holder, 1 coil #20X #25 1 holder, 1 coil #18 X #20
Number of heads supplied with stitcher 1 1
Number of heads that can be used simultaneously 1 1
Size of table Flat 9" x 21" with gauges
Saddle 6" x 26"		 Flat 9" x 21" with gauges
Saddle 6" x 26" (optional)
Floor (or bench) space 27" x 27 1/2" 27" x 27 1/2"
Motor 1/3 HP, 115 AC 60 cycle single phase 1/3 HP, 115 AC
60 cycle single phase
Net weight 382# 382#
Shipping weight 457# 457#
Presstek … A Smarter Way To Print